Original Article
  • Recyclable Flame-retardant Ni-plated Glass/Vitrimer Composites with Electromagnetic Interference (EMI) Shielding Effectiveness for Battery Pack Enclosure
  • Geon-Gyu Lee*, Un-Seong Jo*, Ho-Jin Choi*, Hyo-Byung Chae**, Yong-Seok Choi**, Won-Jin Na**, Young-Woo Nam*,***†

  • * Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University (KAU)
    ** Composites Materials Applications Research Center, Korea Institute of Science and Technology (KIST)
    *** Aeronautics Major, College of Engineering, Korea Aerospace University (KAU)

  • 배터리 팩 인클로저 적용을 위한 니켈 도금 유리섬유/비트리머 복합재의 난연성, 전자기파 차폐 성능, 재활용 특성 평가
  • 이건규* · 조운성* · 최호진* · 채효병** · 최용석** · 나원진** · 남영우*,***†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Fiber-reinforced composites (FRCs) are widely used as lightweight structural materials because of their high specific strength and stiffness. However, thermoset composites are difficult to reprocess and recycle because of their irreversible crosslinked networks. In this study, Ni-plated S-glass/vitrimer composites containing 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) were developed for electric vehicle battery pack enclosures. Their flame retardancy, electromagnetic interference (EMI) shielding, and recyclability were evaluated. The composites achieved a UL-94 V-0 rating. With DOPO addition, the peak heat release rate (pHRR) and total heat release (THR) decreased to 114.3 kW/m² and 15.8 MJ/m², respectively. The composites also exhibited an EMI SE above 20 dB over 4–18 GHz. Ni-plated S-glass fibers were recovered through solvent-based swelling and reused to fabricate recycled composites. The recycled composites retained approximately 68.0% of the tensile strength and 75.9% of the tensile modulus while maintaining EMI shielding effectiveness above 20 dB. These results demonstrate the potential of Ni-plated S-glass/vitrimer composites as sustainable multifunctional composites for electric vehicle battery pack enclosures.


섬유 강화 복합재는 우수한 비강도와 비강성을 바탕으로 경량 구조재로 널리 활용되고 있으나, 열경화성 수지의 비가역적 가교 구조로 인해 재가공 및 재활용이 어렵다는 한계가 있다. 본 연구에서는 전기자동차 배터리 팩 인클로저용 다기능 복합재를 개발하기 위해 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO)가 도입된 Ni-plated S-glass/vitrimer 복합재를 제작하고 난연성, 재활용성, 전자기파 차폐 성능을 평가하였다. 본 연구에서 개발된 복합재는 UL-94 수직 연소 시험에서 V-0 등급을 달성하였으며, 콘 칼로리미터 시험 결과 DOPO 첨가 시 pHRR과 THR이 각각 114.3 kW/m²와 15.8 MJ/m²로 감소하였다. 전자기파 차폐 성능은 4–18 GHz 대역에서 20 dB 이상의 차폐 성능을 확보하였다. 용매 기반 팽윤 공정을 통해 회수된 Ni-plated S-glass 섬유를 이용하여 복합재를 재제작한 결과, 인장강도와 인장강성은 재활용 전 대비 각각 68.0%와 75.9%를 유지하였으며, 재활용 후에도 4–18 GHz 대역에서 20 dB 이상의 전자기파 차폐 성능을 유지하였다. 본 연구에서 개발된 복합재는 난연성, 강화재의 재사용 가능성, 전자기 차폐 성능을 동시에 확보하여 친환경 배터리 팩 인클로저용 다기능 구조재로서의 적용 가능성을 제시하였다.


Keywords: 다기능 복합재(Multifunctional composites), 비트리머(Vitrimer), 난연성(Flame retardancy), 전자기파 차폐(EMI shielding), 재활용(Recycling)

This Article

Correspondence to

  • Young-Woo Nam
  • * Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University (KAU)
    *** Aeronautics Major, College of Engineering, Korea Aerospace University (KAU)

  • E-mail: ywnam@kau.ac.kr