Hye-Jin Shin*, Jung-Ryul Lee*†
* † KAIST, Department of Aerospace Engineering
신혜진* · 이정률*†
This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
As the utilization of composite materials in the aerospace sector increases, the importance of non-destructive testing (NDT) for ensuring the reliability of composite components is also growing. However, existing NDT technologies have limitations in inspecting aircraft and space launch vehicle components with complex shapes; although robotic arm technology has been introduced to address this, the payload limitation of robotic arms makes lightweight onboard equipment essential. In this study, a lightweight laser scanning head based on a fiber-optic laser beam transmission system was developed for a robotic pulse-echo laser ultrasonic propagation imaging (PUPI) system. The scanning head weight was reduced by approximately 52%, from 20.9 kg to 10.1 kg. In damage visualization tests on a 2 mm thick, 16-ply CFRP specimen containing four artificial inserts of 5-20 mm, the excitation energy delivered through the optical fiber was 87.4% of that of the conventional system; when the excitation laser output was compensated to 26 A, the defect detection area measured by the 6 dB drop method reached 97.1% of that of the conventional system. These results demonstrate the feasibility of a robotic PUPI system employing fiber-optic laser beam transmission technology.
항공우주 분야에 복합재의 활용도가 크게 증가하면서 복합재 부품의 신뢰성 확보를 위한 비파괴검사기술의 중요성 또한 증가하고 있다. 그러나 기존 비파괴 검사 기술로는 복잡한 형상의 항공기 및 우주발사체 부품 검사에 한계가 있어 로봇 암 기술이 도입되고 있으나, 로봇 암은 가반 하중 제한이 크므로 탑재 장비의 경량화가 필수적이다. 본 연구에서는 로보틱 펄스-에코 레이저 초음파 전파 영상화 시스템을 위한 광섬유 레이저 빔 전송 시스템 기반의 레이저 스캐닝 헤드 경량화 기술을 개발하였다. 그 결과 스캐닝 헤드 중량을 20.9kg에서 10.1kg으로 약 52% 저감하였다. 기존 PUPI 시스템과 동등한 성능을 발휘하는지 검증하기 위해 5~20mm 인공 삽입 결함 4개를 포함하는 두께 2mm, 16 ply CFRP 시편에 대한 손상가시화 시험에서 광섬유 전송에 따른 가진 에너지는 기존 대비 87.4% 수준이었으나, 가진 레이저 출력을 26 A로 보상한 경우 6dB drop 기준 결함 검출 면적이 기존 시스템 대비 97.1%를 나타내었다. 이를 통해 광섬유 레이저 빔 전송 기술을 적용한 로보틱 PUPI 시스템 개발이 가능함을 입증하였다.
Keywords: 논문 형식(Paper format), 3D 형상 복합재 부품(3D shape composite parts), 펄스-에코 초음파전파영상화(Pulse-Echo ultrasonic propagation imaging), 경량화(Lightweighting), 광섬유(Optical fiber), 비파괴평가(Non-destructive evaluation)
This Article2026; 39(5): 411-416
Published on Oct 31, 2026
Correspondence to* † KAIST, Department of Aerospace Engineering