Special Issue
  • Effects of PZT Powder on Vibration and Compression Properties of Ti Powder/Polymer Concrete Composites

  • Jaehyun Park**, Seok-Ryong Kim*, Kyoung-Soo Kim*, Geon Kim*, Seok-Ho Kim*, Beom-Joo Lee*, Anmok Jeong**, Jonguk An**, Seon Ju Kim*, Si-Maek Lee*, Hyeong-Min Yoo*†

  • * School of Mechanical Engineering, Korea University of Technology and Education (KOREATECH)
    ** Smart Manufacturing System R&D Department, Research Institute of Clean Manufacturing System, Korea Institute of Industrial Technology

  • PZT 파우더 첨가에 따른 티타늄 파우더/폴리머 콘크리트 복합재료의 진동 특성 및 압축 물성 분석

  • 박재현**·김석룡*·김경수*·김건*·김석호*·이범주*·정안목**·안종욱**·김선주*·이시맥*·유형민*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

In this study, Ti powder/Polymer concrete composites were processed by adding the PZT powder, one of the piezoelectric materials, to improve the vibration damping effect of Polymer concrete. Ti powder was added at a constant ratio in order to maximize the vibration damping effect using the piezoelectric effect. Three types of composite material specimens were prepared: a specimen without PZT powder, specimens with 2.5 wt% and 5 wt% of PZT powder. The vibration characteristics and compression properties were analyzed for all specimens. As a result, it was confirmed that as the addition ratio of PZT powder increased, the Inertance value at the resonant frequency decreased due to the piezoelectric effect when the vibration generated from Ti powder/polymer concrete was transmitted. Especially, the Inertance value was decreased by about 19.3% compared to the specimen without PZT at the resonant frequency. The change in acceleration with time also significantly decreased as PZT powder was added, confirming the effect of PZT addition. In addition, through the compression strength test, it was found that the degree of deterioration in compression properties due to the addition of PZT up to 5 wt% was insignificant, and it was confirmed that the powder was evenly dispersed in the composites through the cross-sectional analysis of the specimen.


본 연구에서는 기존 폴리머 콘크리트의 진동 감쇠 효과를 향상시키기 위해 압전 재료 중 하나인 PZT 파우더를 첨가하여 티타늄 파우더/폴리머 콘크리트 복합재료를 제작하였다. 티타늄 파우더는 압전 효과를 이용한 진동특성 변화를 극대화하기 위해 일정한 비율로 유지하였고, PZT 파우더를 첨가하지 않은 시편, PZT 파우더를 2.5 wt%, 5 wt% 첨가한 세 가지 종류의 복합재료 시편을 제작하였으며, 모든 시편에 대해 진동 특성 및 압축 물성 분석을 진행하였다. 그 결과, PZT 파우더 첨가 비율이 높아질수록 티타늄 파우더/폴리머 콘크리트에서 발생한 진동이 전달될 때 압전 효과로 인해 공진주파수에서 전달 함수 Inertance 값이 작아지는 것을 확인하였고, 특히 PZT 파우더 5 wt% 첨가 시편의 경우, 공진주파수에서 Inertance 값은 PZT가 첨가되지 않은 시편에 비해 약 19.3% 감소하는 것으로 나타났다. 시간에 따른 가속도 변화 폭 역시 PZT 파우더가 첨가됨에 따라 크게 감소하는 것으로 나타나 PZT 첨가에 따른 효과를 확인할 수 있었다. 또한, 압축강도 시험을 통해 5 wt%까지의 PZT 첨가에 의한 압축 물성 저하 정도는 미미한 것으로 나타났고, 시편 단면 분석을 통해 파우더가 고르게 분산된 것을 확인하였다.


Keywords: 폴리머 콘크리트(Polymer concrete), 복합재료(Composite materials), 타이타늄산 지르콘산 연(PZT), 진동 특성(Vibration property), 압축 강도(Compression strength)

This Article

Correspondence to

  • Hyeong-Min Yoo

  • School of Mechanical Engineering, Korea University of Technology and Education (KOREATECH)

  • E-mail: yhm2010@koreatech.ac.kr